Polyurethane Screed solutions for factories in East Anglia.
Used extensively throughout the food industry, this totally seamless product can be coved to ensure the highest standards of hygiene can be achieved after the floor has been laid.
There are primarily two version of Polyurethane screeds, a hand trowelled system providing a textured finish and a self levelling version. We generally recommend the troweled systems as they offer high levels of slip resistance, essential where floor areas may be constantly wet through washing down.
Trowelled polyurethane screeds are laid at 6mm for normal use and 9mm where steam cleaning of the floor is required, this highly chemical and temperature resistant floor is actually stronger than concrete.
It is common, especially in commercial kitchens and food manufacturing facilities where polyurethane screeds have been installed, to incorporate a seamless floor cove. The coving is formed in-situ with a similar material to the floor and is often colour matched, although a contrasting colour is also possible.
The cove can be finished to a trim installed on the wall, or in some cases can be seamlessly finished into the wall finishes, whether that be tile, wall panelling etc. Common coving sizes are 100mm high with either a 50mm or 25mm radius cove, although the cove height can be adjusted to clients requirements.
- Very high chemical resistance
- High abrasion resistance
- Easy to clean and sterilise
- Heat resistant to 120 degrees at 9mm
- Withstands high mechanical stress
- Good slip resistance
- FeRFA Type 8
- Seamless Coving
Why Use Polyurethane Screeds?
Available in a wide range of colours and finishes.
This self-smoothing epoxy screed is totally impervious, therefore, Applications range from food and pharmaceutical sites, public buildings to leisure centres. With anti-static, textured and designer colour ranges available, Floteck’s epoxy screed is the top choice for a long term flooring solution.
We will ensure minimal intteruption to your business because we ensure work is carried out within set deadlines.
EPOXY FLOOR COATINGS
Epoxy resin floor coatings provide hardwearing surfaces which are ideal for most industrial environments and can be used where a seamless resin floor is required.
Epoxy resin coatings provide a tough and durable protective finish in a variety of colours for a wide range of applications from domestic garages to heavy industrial use.
Aggregates can be added to the coating to provide a non-slip surface if required.
Polyurethane screeds are typically laid between 6mm to 9mm and provide a highly durable impact resistant and commercial resistant floor finish. These floors are most effective in areas such as food production factories, breweries, chemical plants and engineering industries. With non-slip properties and the ability to be steamed cleaned these floors set themselves apart from the rest when areas are being used for heavy use and commercial spillages.
CEMENTITIOUS LEVELLING SCREEDS
Cementitious levelling screeds and used to level poor substrates where tolerances need to be achieved when laying finishes such as carpet, vinyl, tiles, wood flooring and resin.
Cementitious levelling screeds can be laid from 3mm up to 40mm in one application with fast setting properties you can expect to overlay with new finishes in 24 hours. The material can be mixed by drill or for larger areas mixed with a specialist pump. At an average of 8mm you can expect to lay in excess of 1000m2 a day using a pump.